Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts
Description
The adjustable ridger will create ridges and furrows in previously cultivated ground.
The ridger consists of a "V" shaped body that penetrates the soil to break up the surface. The furrow is created by the two adjustable mouldboards which are hinged to the body and so push the earth off to the side.
The adjustable ridger will create furrows up to 385mm (15") wide.
It fits to the power unit via a toolbar and so relies on the traction of the power unit to pull it through the ground.
See also the trailed ridger, which fits into the back of the rotavator.
Because of drag created by the ridger, the use of optional spade lug wheels and/or wheel weights is recommended.
| Adjustable Ridger | |
| Working Width | 10cm (3") to 38.5cm (15") |
| Dimensions (L W H) | 71 x 39 x 47cm* |
| Weight | 16kg / 24kg |
*with wings at maximum width
Which power units will the adjustable ridger fit to?
| BCS 710 | |
| BCS 728 | X |
| BCS 738 | X |
| BCS 740 | X |
| BCS 750 | X* |
| BCS 780HY | X |
| BCS 614 | |
| BCS 615 | |
| BCS 618 | |
| BCS 630 | |
| BCS 630WS | |
| BCS 660HY |
*There is a different ridger for the BCS 750.
Are any couplers or toolbars needed?
If the power unit has the Implement Quick Coupling fitted then a Blank Coupler will be required.
Is there anything else required?
Spade lug wheels may be beneficial and/or wheel weights if extra traction is needed.
DOWNLOADS
Parts Diagrams
Operating Manuals
Technical Bulletins
Invalid password
Enter