DESCRIPTION

The brush is available in three widths, 80cm (32"), 100cm (40"), or 120cm (47") and is fitted with heavy duty nylon bristles which are very hard wearing.

The rear castor wheels assist with manoeuvrability and also allow for easy height adjustment - simply add or remove the spacers as required to make the brush higher or lower. The working angle is easily adjusted either left, right or straight ahead by selecting one of three holes.

Because the brush is PTO mounted, it will also pivot separately to the tractor to follow the contours of the ground.

The brush is made up of sections of wavy and straight brushes which means that the bristles can be replaced in sections. This is very cost effective as if one side wears more quickly then just an individual section can be changed.

This powered brush is the ideal tool for many different sweeping applications including leaves, moss, mud and more. It also excels as a snow brush, easily clearing snow up to 10cm deep to leave a clear, safe surface.

SPECIFICATION

Power/Snow Brush
Working Width	80cm (32")	100cm (40")
Brush Sections	4 x Straight 14 x Wavy	4 x Straight 18 x Wavy
Transmission	Gears
PTO RPM	990
PTO Rotation	Clockwise
Dimensions (L W H)	__ x 92 x __cm	__ x 112 x __cm
Weight	68kg	74kg

Which power units will the power/snow brush fit to?

	80cm (32")	100cm (40")	120cm (47")
BCS 710	X
BCS 728	X
BCS 738	X	X	X
BCS 740	X	X	X
BCS 750	X	X	X
BCS 780HY	X	X	X
BCS 614	X
BCS 615	X
BCS 618	X	X*	X*
BCS 630	X	X	X
BCS 630WS	X	X	X
BCS 660HY	X	X	X

*GX270 engine only.

Are any couplers or toolbars needed?

If the power unit has the Implement Quick Coupling fitted then an Additional Coupler will be required.

Please note: The BCS 660 and 750 power units have their own specific coupler.

DOWNLOADS